Cam Followers

Cam Follower G

Cam Followers Cylindrical Roller Bearings

Abrasion resistance

Accuracy

Load

Stability

Lifetime

Price

Centralized Lubrication Type Cam Follower

These bearings have one or two pipe-threaded holes in the stud, Thus, this series is suitable when centralized lubrication is required.

Cylindrical Roller Cam Follower

These bearings are full complement type bearings incorporating double rows of full complement cylindrical rollers in the outer ring, and can withstand large radial loads. Additionally, the outer ring is guided by the outer ring shoulder and the end face of cylindrical rollers to the axial direction.

Easy Mounting Type Cam Follower

These bearings have a stepped tapered portion on the slud. When mounting the Cam Follower, it is easy to fix its location by tightening a set screw to the stepped portion. Thus, this type is suitable when a large number of Cam Followers are used in a machine such as a pallet changer.

Eccentric Type Cam Follower

The eccentric stud can be rotated to create a uniform line,enabling easy adjustment for even load distribution across the outer ring outer surface. Eccentricity is 0.4 (CFE)~1.5 mm.

Inch Series Cam Follower

Two types, CR and CRH, are available in the Inch series Cam Followers. Black oxide fiIm treatment is made on CRH models. CR with ThrustDisk Seals"M prevents the ingress of foreign substances as well as friction and abrasion on the interior of the bearing caused by axial load generated due to mounting errors.

Miniature Type Cam Follower

These are compactly designed bearings, incorporating very thin needle rollers in an outer ring with a small outside diameter. They are used in electronic devices,OA equipment,small index devices,etc.

Solid Eccentric Stud Type Cam Follower

The eccentric stud can be rotated to create a uniform line,enabling easy adjustment for even load distribution across the outer ring outer surface. These are eccentric cam followers with an integrated stud that can be mounted in the same mounting holes as those for Standard Type Cam Followers. Eccentricity is from 0.25 mm to 0.6 mm.

Standard Type Cam Follower

These are the basic type bearings in Cam Followerseries. Standard Type Cam Followers CF...B with stud diameters ranging from 3 mm to 30 mm are available,and are suitable for a wide range of applications. Standard Type Cam Follwers CFKR have sockets with hexagon holes on both stud ends, which allow mounting with a hexagon wrench from either side.

Stud Type Track Rollers

Thrust Disk Type Cam Follower

The thrust disk seal, made of special synthetic resin with excellent abrasion and heat resistance, is incorporated in the sliding contact area between the shoulders of the outer ring and the stud head and side plate. This prevents fiction and abrasion inside the bearing due to axial loads caused by mounting errors.